Ghost Immobiliser 2
The ghost immobiliser is a brand new generation device that locks the vehicle without cutting wires or putting in an aftermarket alarm or immobiliser fob. It's connected to your vehicle's CAN data network and is programmed with a unique PIN code that you can enter using buttons on the dashboard and steering wheel.
Enhanced Security
It's more crucial than ever to invest into security solutions that are aftermarket. Ghost Immobiliser 2 is a discreet and efficient device, designed to ward off key cloning, hacking, signal jamming and much more. This TASSA certified system uses your vehicle's CAN data networks and works without emitting radio frequencies. This makes it virtually impossible to disable, as it is not detectable by scanners that are used externally by thieves.
The device connects directly with your vehicle's ECU through the CAN data circuit. This means that it does not require any additional wires or batteries and is completely silent. It also communicates to your vehicle's buttons on your steering, door panels, and centre console in order to create a customisable dearm sequence (like PIN codes) that needs to be entered prior to the engine's start. This unique sequence is 4 to 21 button presses, and can be changed at any time you want.
This system has been checked independently to ensure it meets European legal requirements for immobilisers. Moreover, it's fully accredited by insurance companies which will assist you in reducing the cost of premiums. Furthermore, it's a simple solution that doesn't need any maintenance and can be transferred to another vehicle when required.
This system is not susceptible to hacking techniques like signal jamming and device spoofing. It is able to stop the use of relay theft techniques employed by criminals in order to steal your car.
The Service/Valet mode is among of the most useful functions. This allows you to temporarily disable the immobiliser, which allows maintenance workers to work on your vehicle. This mode can be reverted to normal operation by following the quickest procedure, while securing your vehicle's security after the technician has left.
The call alerts feature will let you know when the system detects suspicious activity on your vehicle. It doesn't matter if it's an attempt at tampering or an attempt to steal your vehicle the system will inform you and notify authorities immediately. This will greatly increase the chance of regaining your vehicle, even if it's already been taken by a criminal.
Call Alerts
With the rate of vehicle theft increasing across the nation, it's never been more crucial to increase the security of your vehicle. The Ghost immobiliser is an innovative anti-theft system that works unlike any other available. It is simple to install and is undetectable to thieves. It also offers numerous advanced features that protect your vehicle.
Contrary to aftermarket key fobs for immobilisers, the ghost immobiliser connects directly to the vehicle's CAN data bus. This means that the device is not detected by professional thieves and that it is not able to be removed from the car's engine without a special disarm sequence. This is accomplished through a unique, changeable PIN code entered through existing buttons on your dashboard and the steering wheel. The system won't start the engine until the correct code is entered first, regardless of whether you have keys.
It uses the same sensors that are utilized in your regular car key-fob. This means that there are no LED indicators that indicate its presence. This is a major advantage over traditional immobilisers which use LED indicators to show the system is activated. The ghost immobiliser is designed to work as discreetly as possible and can be customised to include up to 20 button presses in the disarm sequence and makes it harder for thieves who would like to steal it to identify.
The system can be linked with a mobile app to provide a new level convenience. This app allows you to control the Ghost remotely, removing the need for a lengthy button disarming sequence. The app can be used to set the 'Service mode' when you have to offer your vehicle to a service or valet park.
It's always recommended that the Ghost immobiliser is installed by a professional. This will not only ensure that the device will be properly configured for your vehicle, but also help to prevent any errors that could cause the system to cease working. DIY installations can lead to the device not properly set up or inoperative. Ghost immobilisers 2 come with a five-year warranty and are TASSA certified to ensure your security. Insurance companies can offer discounts when you have a ghost immobiliser 2 in place.
Disreet Operation
The subtle operation of ghost immobilisers ensures they aren't visible or hear, which makes them a powerful deterrent to criminals. Ghost immobilisers operate quietly, which means that criminals can't discern them until they're close to the vehicle. This makes them a great alternative for vehicles with limited visibility such as motorhomes and vans.
The most current ghost technology stops key cloning and theft by connecting to your vehicle's CAN data networks. This prevents the engine from starting until a unique PIN sequence is entered. It cannot be accessed by codes-grabbing or RF scanning. It also comes with an GPS tracker, and an encrypted iPhone application that allows you to remotely manage your vehicle. This gives you a greater protection against vehicle hacking as well as key cloning. It also has a 'valet' mode for the occasions when you wish to park your car in an unattended garage or driveway.
When you install a ghost immobiliser, it will be discreetly placed within the dashboard of your vehicle or on the steering wheel, so it's not evident that it's there. Its design is sleek and subtle so that it doesn't compromise your vehicle's appearance or function and operates in a similar manner as the password feature on smartphones, requiring a specific sequence of buttons to be pressed to start the engine. It's TASSA-certified and endorsed by insurers, and is one of the best methods to keep your prized possessions and joy safe from theft.
Ghost immobilisers are able to work with a variety of automobiles, including electric ones. This is due to their compatibility with the CAN Bus system, which is used in a lot of modern vehicles. This is a huge benefit because you can utilize the system in a variety of vehicles and even transfer the device from one vehicle to another when needed.
You will need to follow instructions given by the manufacturer in order to install a ghost immobiliser. These will typically include safety guidelines like wearing a protective gloves and ensuring that the area where you work is free of any dangers. In addition, you will have to refer to the user's manual or any installation documents you may have in order to pinpoint the exact location of the device within your vehicle. Once you have located it, installation should be fairly straightforward as there isn't any complicated wiring involved.
Easy Installation
Ghost is linked to the CAN data network of your vehicle, so it does not require a key fob. It also doesn't require LED indicators. Instead, it works using buttons that are already on the steering wheel and on the centre console to create a unique PIN sequence that cannot be duplicated or cracked by thieves. This makes it silent and discrete, increasing the value of your vehicle should you decide to sell.
The system also helps safeguard your car from cloning and hacking by blocking communication between the device and the ECU. It also detects tampering, and will shut off if it senses that your car has been damaged or interfered with. This is a huge step forward in protecting your pride and joy from car thieves and thieves alike.
Our TASSA certified engineers can install the device within several hours. It's completely reversible and it leaves no permanent marks on your car's interior bodywork. This makes it ideal for those who wish to keep their vehicle in good condition and increase its value for resale.
Unlike other immobilisers on the market Ghost does not require a keyfob to operate and is completely wireless. The immobiliser will prevent the vehicle from starting if the proximity keyfob has been stolen. It will also inform you that the proximity fob is being used in an unknown way, so you can call the authorities.
Once the Ghost immobiliser has been installed, it is ineffective to cut your engine unless you enter the PIN code, or use the application (optional). Its design was designed with the user experience in mind and is extremely easy to operate. Your PIN can be programmed for up to twenty presses. This makes it difficult for thieves to guess or even crack. You can also start your car for short durations when you are taking it to a garage for repairs or servicing.
The system will also disable the driver fob to ensure that you don't leave your car unattended in the driveway with strangers. This is a fantastic feature for people who frequently park their cars in crowded public areas, where they may be vulnerable to opportunistic thieves and car-jacking.